Search results

Thanks guys!

The description says no title. So that begs the question, why no title? Is it stolen? salvaged? Im guessing to title it you would have to title it with a salvage title or some other process and thats why its so cheap. But the question remains, why is there no title? Did he total it and buy it...

Bump

Alex, I'll take the tire repair kit stuff and the factory 55 line splice.

I have the crown lines on my front as well, they are quite nice.

Sorry to hear about Hunner. He definitely pioneered some stuff for the H3 back in the day. Glad his rig is staying with someone likeminded.

Bump

Windrock was a success. Met up with the hummer club and some other buddies who have SAS h3ts and hit the trials. This was largely intended as a shakedown run after the build to see if anything was glaring wrong or if I F-ed up somewhere along the way. Well she passed with flying colors. Couple...

Bump

Rear locker is easy, parts are available for that from what i recall and you can install it. 4:1 t-case can be swapped directly in, all H3 transfer cases are swappable, if you use one from a 2006-2007 you might have to finish adding fluid through the speed hole on the top (also swap out the...

Posting thus here for future reference. Here is a comparison of the h3 rear caliper to a 70s/80s k20/30 jb6 caliper. There is roughly a 30mm difference between the two. These are the brakes that come in 14b disc brake swap kits. From what I've been told/heard anything bigger than this and...

No build thread is complete without poser shots. Lol

Your best bet, for something that you really want and is proper is to do the following: Call accutune offroad and they will set up a fox or king shock for you that is proper. Shock wont necessarily support the weight, if you want weight support, I would slap an off the shelf fox shock...

Well, drove it to the gas station and it didn't fall apart, so that's good!

Here we go, backed out of the garage for the first time.

Well, big day. She's on the ground!!!

If I could tow my H3 with it I would haha

You're local to me, I've seen this one around before!

Here are a couple of easy and free things to check before you start throwing parts at it. Check your battery terminals for corrosion/looseness (this is a common source of electrical gremlins). If you have a sunroof check to see if water has come down and dripped onto the BCM due to a clog in...

Paint paint and more paint Also many many thanks to Chris (06h3) for making another set of brake adapter from his so that I can run the factory h3 brakes on the dana 60 hubs.