BurkaLurk
Probationary Member
- Messages
- 2
- Location
- Patriot Indiana
Hello all! I’m new to registering but I have been viewing post on this forum for years in regards to repairs or upgrade knowledge on these trucks.
My 06 H3 has had a rough year in failures from January replacing most of the front end axle components. In March my valve cover gaskets said bye so I tore all the top end apart and did plugs and such then too. In april water got in my roof and fried my ecm and and module.
Got ecm fixed and tuned out faults from abs to drive the thing.
Now this tired ol girl has a madly bad vibration at idle until 1k rpm and has started drinking oil like I drink beer.
All that to say she is getting a 6.0 soon. Iv learned a lot from 06 H3s build log and will be doing one as well.
Oh, and MERRY CHRISTMAS!
My 06 H3 has had a rough year in failures from January replacing most of the front end axle components. In March my valve cover gaskets said bye so I tore all the top end apart and did plugs and such then too. In april water got in my roof and fried my ecm and and module.
Got ecm fixed and tuned out faults from abs to drive the thing.
Now this tired ol girl has a madly bad vibration at idle until 1k rpm and has started drinking oil like I drink beer.
All that to say she is getting a 6.0 soon. Iv learned a lot from 06 H3s build log and will be doing one as well.
Oh, and MERRY CHRISTMAS!
