atvspeed4
Well-Known Member
- Messages
- 1,212
- Location
- massachusetts
After having many poly bushings fail on our own rigs and our friends trucks we developed a set of UHMW carbon black bushings you should never have to replace. We have been running our first set since 2018 and they are still as tight as new. This was on our 6.0L swapped 2006 that saw heavy towing, tons of wheeling and daily driving in our wonderful salt covered roads. Stock bushings and poly bushings allow the tire to move back in the wheel well during heavy braking and forwards during high torque crawling. This dramatically changes suspension geometry and handling.
Kit includes enough bushings to do both sides lower control arms:
https://www.outfitterdesign.com/h3-lower-control-arm-bushings.html
*this product was one of the few required pieces we were waiting for to get the HD front diff to market to control unwanted CV plunge getting closer now
Kit includes enough bushings to do both sides lower control arms:
https://www.outfitterdesign.com/h3-lower-control-arm-bushings.html
*this product was one of the few required pieces we were waiting for to get the HD front diff to market to control unwanted CV plunge getting closer now