-
Welcome to H4O! For a reduced ad experience, please login or register with the forum.
A
atvspeed4
Latest activity Postings About
-
-
Aatvspeed4 replied to the thread NEW PRODUCT: H3 Lower Control arm bushings.Poly or rubber has give to allow the shackle to twist at the frame and the leaf pack when flexing. Our material practically does not...
-
Aatvspeed4 reacted to 06 H3's post in the thread NEW PRODUCT: H3 Lower Control arm bushings with
Like.
100%, the cheapness is baffling, I understand the world is expensive, I hate it too, but go buy any other 20+ year old vehicle and it... -
Aatvspeed4 replied to the thread NEW PRODUCT: H3 Lower Control arm bushings.Yes exactly. Our concern is some of our pasts customers over the years feel they are smarter than us and when things do not work out...
-
Aatvspeed4 reacted to MakoaH3's post in the thread NEW PRODUCT: H3 Lower Control arm bushings with Like.
Ah ok. Good to know and thank you for the transparency. I'm definitely in the minority for willingness to spend on an old vehicle. I've...
-
Aatvspeed4 replied to the thread NEW PRODUCT: H3 Lower Control arm bushings.Unfortunately not, the material we are using is not a good fit for this application. Didnt someone a long time ago find a generic...
-
Aatvspeed4 reacted to alrock's post in the thread NEW PRODUCT: H3 Lower Control arm bushings with Haha.
Great news! I went through at least three sets of LCA bushings on my H3 during it's lifetime - which was only Sunday trips to the...
-
Aatvspeed4 replied to the thread NEW PRODUCT: H3 Lower Control arm bushings.We did a small run to start it was really to get these in hand so we can get the front diffs closer to being listed for sale and had to...
-
AAfter having many poly bushings fail on our own rigs and our friends trucks we developed a set of UHMW carbon black bushings you should...
-
Aatvspeed4 reacted to EndeavoredH3's post in the thread Hummer H3 HD Dana 50/ CV shaft upgrade with Like.
Im about 12 months out to committing to either a SAS or V-8 swap. @atvspeed4 let me know if I need to hold off on the SAS :p
-
-
Loading…
-
Loading…